0

Your Cart is Empty


RODE VideoMic-R

The RODE is a professional grade 1/2-inch condenser shotgun microphone VideoMic designed for use with consumer video cameras and personal audio recorders.

  • Studio quality Condenser microphone Super-cardioid polar pattern is highly directional, focusing on the subject in front of the camera, and minimizing any surrounding sounds. 
  • Three-step PAD (0, -10, -20dB) for recording loud sound sources such as live music or motorsport.
  • Two-step High Pass Filter (Flat/80Hz) Integrated Rycote Lyre shock mount and windshield  9V battery power and 3.5mm mini-jack output
[{'label':'Black','color1':'transparent','color2':'','image':''},{'label':'Blue','color1':'transparent','color2':'','image':''},{'label':'Green','color1':'transparent','color2':'','image':''},{'label':'Organge','color1':'transparent','color2':'','image':''},{'label':'Red','color1':'transparent','color2':'','image':''}]
$149.99

DESCRIPTION

The RODE VideoMic is a professional grade 1/2-inch condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.The integrated Rycote Lyre based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides high quality acoustic suspension and will never wear out, sag or snap.Its standard sized shoe mount also includes a 3/8-inch thread in the base for easy mounting on a boom pole or stand. By employing a super-cardioid polar pattern, the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimizing any surrounding sounds.In addition to the microphone's native 40Hz-20kHz response, a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.

INCLUDES

(1) VideoMic-R 

(1) Rycote Lyre shock mount 

(1) Integrated windshield 

(1) Integrated 3.5 mm Cable 

SPECS

Acoustic Principle: Line GradientActive Electronics: JFET impedance converter 

Capsule: 0.50"Polar Pattern: Supercardioid 

Address Type: EndFrequency Range: 40Hz - 20kHzOutput Impedance: 200ΩMaximum SPL: 134dBSPL 

Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHzEquivalent Noise Level (A-weighted): 20dBAPower Options: 9v battery powered 

Mounts: Cold Shoe and 3/8 Thread 

Dimensions: L 12 X W 4 x H 5 IN 

Weight: 6.2 OZ / 176 GM 

DESCRIPTION


The RODE VideoMic is a professional grade 1/2-inch condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.The integrated Rycote Lyre based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides high quality acoustic suspension and will never wear out, sag or snap.Its standard sized shoe mount also includes a 3/8-inch thread in the base for easy mounting on a boom pole or stand. By employing a super-cardioid polar pattern, the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimizing any surrounding sounds.In addition to the microphone's native 40Hz-20kHz response, a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.

INCLUDES


(1) VideoMic-R 

(1) Rycote Lyre shock mount 

(1) Integrated windshield 

(1) Integrated 3.5 mm Cable


SPECS


Acoustic Principle: Line GradientActive Electronics: JFET impedance converterCapsule: 0.50"Polar Pattern: SupercardioidAddress Type: EndFrequency Range: 40Hz - 20kHzOutput Impedance: 200ΩMaximum SPL: 134dBSPLSensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHzEquivalent Noise Level (A-weighted): 20dBAPower Options: 9v battery powered 

Mounts: Cold Shoe and 3/8 Thread 

Dimensions: L 12 X W 4 x H 5 IN 

Weight: 6.2 OZ / 176 GM 

Broadcast Recording Quality Microphone

The RODE VideoMic-R is a professional grade 1/2-inch condenser shotgun microphone.

Two step High Pass Filter (Flat/80Hz)

In addition to the microphone's native 40Hz-20kHz response, a selectable high-pass filter at 80Hz is available.

Three Step PAD

A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.

POLAR PATTERN

Operating range for Rode VideoMic GO Super Cardioid Microphone.

FREQUENCY RESPONSE CHART

Operating range for Rode VideoMic GO Super Cardioid Microphone.

Integrated Rycote® Lyre® shock mounting

Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimizing unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions.

RELATED ITEMS

RODE - VideoMic GO
$149.99$99.00